My first DEI 457GW install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67509
Printed Date: July 14, 2025 at 4:32 PM
Topic: My first DEI 457GW install
Posted By: slammedniss
Subject: My first DEI 457GW install
Date Posted: December 02, 2005 at 6:11 PM
After looking over the wiring diagram, most of it seems pretty straight forward. I'm installing with an Ungo RK1 Remote Start on an 05 Silverado.
The gray/black wire has 2 options. Option #1 says take it to the vehicle's pos. dome lite circuit. This can be direct wired, or does it need a relay?
And, the 3wired plug. It says grab the ign. wire leading to the PK module located in the dash. Will these wires be running down the steering column with the other PK wires, or will I need to grab them closer to the module?
Do I do anything with the PK wires in the steering column?
Replies:
Posted By: Mike M2
Date Posted: December 02, 2005 at 6:33 PM
Don't use anything, just run the gray/black to the postive dome light like it says. As for the 3 wire plug, throw it away. It's for Passlock3 only which that truck doesn't have...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: slammedniss
Date Posted: December 02, 2005 at 10:57 PM
Mike M2 wrote:
Don't use anything, just run the gray/black to the postive dome light like it says. As for the 3 wire plug, throw it away. It's for Passlock3 only which that truck doesn't have...
Sweet. Thanks for the reply!
|