Print Page | Close Window

’00 CRV remote start - 1st install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67528
Printed Date: July 07, 2025 at 8:03 PM


Topic: ’00 CRV remote start - 1st install

Posted By: mlrtimev6
Subject: ’00 CRV remote start - 1st install
Date Posted: December 02, 2005 at 10:57 PM

This weekend I'll be installing an Omega R&D Excalibur Gold (EG-1800 atv) with remote start into my 2000 Honda CRV automatic.  I've gotten the wiring diagram from the best car site ever> https://www.the12volt.com/installbay/detail.asp?info=alarm&year=2000&make=Honda&model=CR-V&ID=17980&type=Alarm and was wondering if anyone could double check my connections or comment on any relays needed?  The pinouts on the brain are as follows.

1) Ignition 1
 2) Ignition 2
 3) Starter +
 4) +12v

 5) Lights I/0
 6) Lights I/0
 7) Lights +
 8) Siren/Horn -
 9) Door +
10) Trigger -
11) Door -
12) #3 Channel -

13) Neutral Safety -
14) Brake +
15) Starter -
16) Trunk -

So there it is... which brain wire should go to which color OEM wire?  There is also a molex plug on the side of the brain with (Ignition #1, +12v, Starter -) I don't have the wiring with me and can't remember if I have this plug and therefore don't know if it's optional, but I THINK this is the tach monitor for the remote start???




Replies:

Posted By: redpeppers
Date Posted: December 03, 2005 at 12:36 AM

i would put the igntion 2 to the accessory wire which is a yellow wire at the igntion harness.  i would also just ground the neutrel saftey wire....



-------------
Where theres is a wire there's a way.


Print Page | Close Window