Print Page | Close Window

Code Alarm programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67568
Printed Date: May 15, 2025 at 6:11 AM


Topic: Code Alarm programming

Posted By: ExactOh
Subject: Code Alarm programming
Date Posted: December 03, 2005 at 3:15 PM

I normally install Ultra-Start units, but have a Code-Alarm here.  I can't get the thing to program correctly.  It is a CA-510 remote-start and keyless entry. 

The manual has info on how to program it using the lock and unlock button of the remote for seperate functions... only problem is, these are the same button on the remote!

There are suppose to be 10 features able to be programmed, and I can only get the lights to flash up to four times (not ten) to 'select a feature'. 

If anyone has any experience with incorrect manuals or unusual programming quirks with these, or similar units, please let me know.  Thanks.



-------------
KLS Glass Tinting & Electronics



Replies:

Posted By: ExactOh
Date Posted: December 03, 2005 at 4:58 PM

OK, I got it to work.  I don't know how.  It still baffles me that the programming in the manual refers to the lock and unlock as seperate buttons on the transmitter. 

It also refers to them seperately in the owner's manual.  I hope that the owner doesn't notice that, or if they do, I hope it doesn't bother them.

I am just glad to get it installed and programmed... finally.



-------------
KLS Glass Tinting & Electronics




Print Page | Close Window