Proximity sensor
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6762
Printed Date: August 21, 2025 at 2:39 PM
Topic: Proximity sensor
Posted By: joelr7309
Subject: Proximity sensor
Date Posted: December 16, 2002 at 11:13 AM
Hey guys, I'm installing a Proximity sensor on a 550esp viper alarm, just wondering how to do it right, I'm not sure if I should just jumper Proximity sensor to the main shock sensor, IF I do this , I heard you have to put a DIO between the green and blue wire so that it thinks it has its own address, what size of a dio do i put on or how do I connect it to the (-)neg multiplex blue wire on this 550esp, to the sensor, does anyone one have a diagram?
-------------
THE ROOKIE!~
Replies:
Posted By: Velocity Motors
Date Posted: December 16, 2002 at 12:07 PM
All you need to do is piggyback the appropriate wire ( pre-warn and/or full trigger ) and use a 1N4001 1 amp diode inline of the target wire. Determine what the polarity of the trigger wire is and install the diode band accordingly.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: joelr7309
Date Posted: December 16, 2002 at 12:55 PM
Thanks JEff Where can I buy this dio 1 amp from, like radio shake or some PEP BOYS? ------------- THE ROOKIE!~
Posted By: Velocity Motors
Date Posted: December 17, 2002 at 2:00 AM
They should have them. They are common components so you shouldn't have any problems finding ithem. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|