2006 hummer h-3, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67635
Printed Date: June 25, 2025 at 9:58 AM

Topic: 2006 hummer h-3, remote start

Posted By: Msp541
Subject: 2006 hummer h-3, remote start
Date Posted: December 04, 2005 at 4:31 PM

Anyone install a remote starter on a 2006 Hummer H-3? I have everything hooked up but the alarm goes off when unlocking doors, i don't have the OEM ALARM DISARM wire on my wiring sheet does anyone know the wire i should be looking for and where can i find it? I appreciate any help.

Thanks! Bri posted_image

Replies:

Posted By: KarTuneMan
Date Posted: December 04, 2005 at 5:26 PM

You cannot control the security on this unit, Don't use the GM remote......AT ALL What did you install?

-------------

Posted By: slicksam
Date Posted: December 04, 2005 at 6:26 PM

lock = light blue

unlock = dark blue

location driver's kick panel

i have no information the original alarm

-------------
Testing is the key

Posted By: Msp541
Date Posted: December 04, 2005 at 8:49 PM

I installed a Auto-Page model 615 remote start with keyless entry, i dont like the remotes from GM so i went with my own keyless entry, i just want to use 1 remote and want to know if i can get to the disarm wire so i can finish the installation of the auto page.

Thanks!

Posted By: NowYaKnow
Date Posted: December 04, 2005 at 10:09 PM

As he said there is no disarm wire. Don't use the OEM remote or lock the doors with the door open and the OEM security shouldn't arm. If it comes down to it you will need to energize the ignition wire and your bypass when unlocking to disarm.

Mike

Posted By: Msp541
Date Posted: December 07, 2005 at 5:39 PM

Thanks for the information (NOWYAKNOW) how do i energize the ignition wire with the bypass? I appreciate ur help!

Posted By: NowYaKnow
Date Posted: December 07, 2005 at 6:04 PM

You may have to fire up the ignition, accessory, AND bypass wires. Here's an example of how to do it on the durango the concept is the same just using your vehicles ignition/accessory wires..

posted_image

Posted By: mxxmikexx
Date Posted: December 07, 2005 at 8:25 PM

i just did an o3 h3 a few weeks ago, installed keyless and start, didnt have any problems with fact. security falsing.

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106

Posted By: NowYaKnow
Date Posted: December 08, 2005 at 6:24 AM

The H3 wasn't made in 03. Must've been an H2 which the bypass module for the locks can control the OEM security.

Mike

Print Page | Close Window