Print Page | Close Window

03 Ranger and ProStart 3400

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67675
Printed Date: June 28, 2025 at 12:55 AM


Topic: 03 Ranger and ProStart 3400

Posted By: hxman
Subject: 03 Ranger and ProStart 3400
Date Posted: December 04, 2005 at 11:52 PM

Just finished installing a ProStart 3400-TW and TB-350 Bypass Kit. I followed the instructions from their website and specific docs for the 03 Ranger but can't seem to flash the hood pin and program the remote.

https://www.engines911.com/asdocs/CT-3400TW_ig_en_h310s320v250_040908.pdf

The problem is the lights stay on when trying to program........ The lights will not stay on for the 20 seconds...... I have checked the wiring, looks ok..... Any ideas would be good.

Thanks




Replies:

Posted By: Teamrf
Date Posted: December 05, 2005 at 9:51 AM
You may want to try unhooking the brain, and plugging it back in and see it  that works.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.


Print Page | Close Window