2005 Chevy Uplander remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67824
Printed Date: July 05, 2025 at 2:47 AM
Topic: 2005 Chevy Uplander remote start
Posted By: ziggyb222
Subject: 2005 Chevy Uplander remote start
Date Posted: December 06, 2005 at 7:23 PM
Just did a RS in a 2005 Uplander. Used the GM-SL from Crimestopper. Everything works great except when it is in remote start, the security light and a message saying Starting Disabled appears. As soon as I put the key in the switch, both go out. Also starting with a key all is normal. Any experience with these? Thanks
Replies:
Posted By: secureauto
Date Posted: December 06, 2005 at 11:09 PM
Did you tie in the keysense wire?
-------------
ASE Certified
Posted By: ziggyb222
Date Posted: December 07, 2005 at 5:25 AM
No I did not... How would you tie in with that? negative pulse while in remote???
Posted By: secureauto
Date Posted: December 07, 2005 at 11:08 PM
I've added a link for your cars wiring info:
05 Uplander
Your remote start, depending on the model, should have a (-) while remote starting, try hooking that up. ------------- ASE Certified
Posted By: jacqueslacombe
Date Posted: December 08, 2005 at 12:14 AM
Hi! you should use the out when running - to trigger the key sense but dont forget to use two diode decause you are using this wire for the GM-SL OR leave it that way it do not really affect the operation of the car ! ------------- cocolaboy
Posted By: ziggyb222
Date Posted: December 08, 2005 at 6:35 AM
I will try the keysense wire. Thanks for all the help...
Posted By: tbird2340
Date Posted: December 12, 2005 at 8:47 PM
Ziggy, did that work? I'm doing an 05 Uplander in a couple weeks..
Posted By: ziggyb222
Date Posted: December 12, 2005 at 9:15 PM
I havent had a chance to get the van back..but when I do i will post the results...thanks
Posted By: tbird2340
Date Posted: December 12, 2005 at 9:18 PM
What kind of remote start did you install?
Posted By: ziggyb222
Date Posted: December 12, 2005 at 9:57 PM
Crimestopper rs-1304dp.. and Crimestopper GM-SL bypass module.... worked great
Posted By: NowYaKnow
Date Posted: December 13, 2005 at 1:27 AM
The key sense wire probably won't make a difference on this vehicle. We have done a bunch as well and pretty much just been told it's normal when using a data bypass on these vehicles. Customers don't like hearing that is normal. I also don't buy it as being normal since it doesn't happen everytime you remote start it in my experience anyway. I have switched to key in the box bypasses on these because of this.
Mike
Posted By: tbird2340
Date Posted: December 13, 2005 at 6:58 AM
So basically what the OP is saying is that everything works fine except you get the blinking light and message when doing a remote start UNTIL you put the key in right??
Posted By: ziggyb222
Date Posted: December 13, 2005 at 7:02 AM
You get the security light and a message in the message center that say starting disabled.. goes right out when the key is inserted..
|