02' mitsubishi diamante
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6804
Printed Date: August 13, 2025 at 9:58 AM
Topic: 02' mitsubishi diamante
Posted By: mxxmikexx
Subject: 02' mitsubishi diamante
Date Posted: December 17, 2002 at 12:39 PM
I have a customer who is interested in doing a remote starter/keyless in this vehicle, they want to know if there is any way to retain the transmitter priority like the factory remotes have, i.e. one remote has one presets for one driver likethe power seats, etc.. and another remote retains presets for the other driver. does anyone make anything that can interface and do this? I've never been asked this by a customer before so i have no idea. I believe trilogix makes a piece for chevy/gmc etc.. but ive never heard of anything for mitsubishi. thanks !
Replies:
Posted By: Velocity Motors
Date Posted: December 17, 2002 at 1:09 PM
Priority Door Lock Relay Thanks 10nesne1 for this diagram ! ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: JWorm
Date Posted: December 17, 2002 at 10:24 PM
Not positive, but I believe some of those vehicles can come with bronzed windshields. They will have a copper colored tint to them if they do. It can kill the range of the system...or at least it did on the Subaru SVX my shop did before.
Posted By: Velocity Motors
Date Posted: December 18, 2002 at 12:25 AM
??? I think you must have the wrong post.  ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: JWorm
Date Posted: December 18, 2002 at 9:28 PM
Nope....right post. Just warning him he might have sucky range because of the windshield.
Posted By: Velocity Motors
Date Posted: December 19, 2002 at 1:21 AM
Ohhhh  Sorry, just seems out of context that's all. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: jrilla
Date Posted: December 19, 2002 at 7:54 AM
mxxmikexx, I cannot refer you to what you need exactly, but I believe there is a Clifford unit, or an add-on module for a clifford that will do what you need it to do. The one from Trilogix claims that their modules only retain this for one driver, but they do not even have one for mitsubishi as far as I know. here is the diagram of the Clifford Intellipage, if I am way off about this, then Sorry, I really didn't look into this, I just knew I had seen something like what you ere talking about. https://www.autoelectric.ru/autoalarm/clifford/intellipage/intellipage-m.htm------------- J Rilla
Owner/Installer
Posted By: mxxmikexx
Date Posted: December 19, 2002 at 6:07 PM
yeah, i called trilogix yesterday and they dont have anything for this vehicle yet. but i guess they are working on it., thanks for the info tho!
Posted By: Velocity Motors
Date Posted: December 20, 2002 at 11:18 PM
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|red |+ |steering column |
| STARTER|BLACK/ red |+ |steering column |
| IGNITION|BLACK/ white |+ |steering column |
| SECOND IGNITION|blue/red | | |
| ACCESSORY|blue/white |+ |steering column |
| POWER LOCK|blue |- |in drivers door |
| POWER UNLOCK|RED / green *1 |- |in drivers door |
| LOCK MOTOR|blue/red | |drivers kick panel |
| UNLOCK MOTOR|blue/black | |drivers kick panel |
| DISARM DEFEAT|blue/black | |passengers kick panel |
| PARKING LIGHTS +|GREEN / WHITE | |dimmer switch |
| PARKING LIGHTS -|GREEN / WHITE | |headlight switch |
| HEADLIGHTS|RED / yellow |- |headlight switch |
| DOOR TRIGGER|GREEN/ orange |- |underdash light |
| TRUNK/HATCH PIN|green or grn/blk |- |drivers kick panel |
|TRNK/HTCH RELEASE|RED / yellow |- |at switch |
| FCTRY ALARM ARM|arms with lock | | |
|FCTRY ALRM DISARM|disarms with unlock | | |
| DISARM NO UNLOCK|BROWN / green |- |drivers kick panel *2 |
| TACHOMETER|wht/grn or white | |at coil pack |
| SPEED SENSE|WHITE/ blue | |diag connector near column |
| BRAKE WIRE|green |+ |at brake pedal |
| HORN TRIGGER|grn/red or RED / wht |- |steering column |
| WIPERS|blu/org, blu/red |+ |wiper motor |
| LF WINDOW UP/DN|blu/red - grn/blk |A |in LF door at switch |
| RF WINDOW UP/DN|blu/red - grn/blk |A |in RF door at switch |
| LR WINDOW UP/DN|RED / blk - grn/blk |A |in LR door at switch |
| RR WINDOW UP/DN|RED / blk - grn/blk |A |in RR door at switch | Notes:
NOTE: Some models have an immobilizer system that needs to be bypassed during remote start. Use DEI module 555U to bypass. *1 A single pulse unlocks just the drivers door, and a double pulse will unlock all of the doors. *2 This is the trunk key cylinder wire, it is in the harness running to the rear of the vehicle. Metering by turning the key in the trunk.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: iskidoo
Date Posted: March 04, 2003 at 9:06 AM
Jeff is there any way to trigger the door locks without having to go into the door? What a pain in the *** it is to take the door apart to give 2 negative pulses. Any help would be appreciated.
Posted By: Velocity Motors
Date Posted: March 04, 2003 at 3:31 PM
There are two other places that you can grab the unlock & lock wires for the 2002 Diamante. You will need to go to the ECM high on the driver's kick panel (-) trigger wires. The colors are: - LOCK : RED
- UNLOCK : RED / GREEN
Other than this you will have to go into the driver's door for the wires. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: iskidoo
Date Posted: March 04, 2003 at 5:35 PM
Thanks Jeff, I think I might have messed up the transponder cause its not starting at all now, turn over and turns but no security light. Any info or help on this would be great
Posted By: Velocity Motors
Date Posted: March 04, 2003 at 5:44 PM
Try moving the key around & also the ring on the cylinder. Another thing to test is try putting the key in the cylinder but do not turn it over and try to remote start the car. If it does, then you know it's just the placement of the key in the module or the ring placement.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: iskidoo
Date Posted: March 05, 2003 at 1:15 PM
Figured it out. when I swapped the rings I forgot to plug the OEM harness back in. So nothing was starting, not even with the regular key. I thought I had put it into the security shutdown that only the dealer could fix. Then I remembered that I hadn't plugged that harness back in and it started right up after that. Silly mistake but I was a bit worried for a while. Any way if that ever happened that it locked up like that. Is there any way to reset the computer without having to take it to the dealer?
Posted By: Velocity Motors
Date Posted: March 05, 2003 at 4:16 PM
Try to o'l remove the ground from the battery trick for about 30 minutes. Other than that you probably need the scan tool to remove the error from the CPU.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|