viper 791 xv, 05 legacy gt
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68061
Printed Date: May 06, 2024 at 3:36 AM
Topic: viper 791 xv, 05 legacy gt
Posted By: mms3113
Subject: viper 791 xv, 05 legacy gt
Date Posted: December 09, 2005 at 10:27 PM
hello all. i recently purchased a viper 791xv alarm/remote start system for my 2005 subaru legacy gt wagon. being an avid car freak and picky about who works on my car, i tryed to install this myself (read still trying). any ways. this thing is kicking my butt. i have to complete manual for the legacy. i have read the viper manual a few times. i have been trying to get this all set up. i have the primary wires for the xsrc (the main ignition relay box and wiring). i have the tach hook up complete. the netral switch on my car is ground when in gear not the way the viper wants it. so i taged into the parking brake switch. the hood switch is done. the primary harnes power and ground is hooked up. i tired plugging all the parts in to see if the system would start or try to start or anything. but not even any relays click in the box. what am i missing?
thanks craig
ps im a newb here but need some help so take it easy on me please
Replies:
Posted By: mms3113
Date Posted: December 11, 2005 at 2:03 PM
well i guess the remote start does work. i didnt have the ribbon pluged in good enough
the 556u imobilizer bypass is strong enough to work with the antenna ring ontop of the oem ring. so it can be completly hiddin behing the steering coulom covers. now i just need to wire the rest. but its to cold in the garage 39*
|