Print Page | Close Window

05 mazda mpv lock wire location?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68201
Printed Date: May 18, 2025 at 9:50 PM


Topic: 05 mazda mpv lock wire location?

Posted By: bruc007
Subject: 05 mazda mpv lock wire location?
Date Posted: December 12, 2005 at 11:25 AM

Hey, I am having a problem finding which wire is the single wire for the lock/unlock.My information says that it is below the column in the keyless module,but I cant really locate it,any help or photos would be appreciated.I know it is a single wire system using diodes and 1000k ohm resistor.
Also ,the weird thing is with this van is by all accounts it should have a immobilizer system ,yet it does not. It has the large key and all info in manual says it comes equipped,yet nothing at the key cyl and no light or symbol on dash.I hooked up remote and it works perfect with no by-pass installed????

Thanks,bruce



Replies:

Posted By: jacqueslacombe
Date Posted: December 14, 2005 at 2:15 AM

Hi! this is top driver kick it's a black box with a white connector (24 pin ) the wire color is light green    1k ohm =lock

        ground   =   unlock



-------------
cocolaboy


Print Page | Close Window