Hazard Lamps

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6822
Printed Date: August 09, 2025 at 11:07 PM

Topic: Hazard Lamps

Posted By: rrspyder
Subject: Hazard Lamps
Date Posted: December 17, 2002 at 7:21 PM

Is it possible to tie the light flashing output of my VIpver V790xv into the hazard lights instead of the light switch on my 2002 Mustang GT? I do not like having all of the interior lights flash including my gauges and my stereo receiver when I arm the car. Just seems like a bunch of unneeded flashing to me. I would just like the hazard lights to flash if at all possible. Also any chance that someone knows where the wire is for this if it is possible?

Thanks,

Kyle

Replies:

Posted By: Velocity Motors
Date Posted: December 18, 2002 at 12:42 AM

Never done the hazard light, but they should be accessible through the actual switch . Take the switch out and probe the wire that tests (+) when the 4 way flashers are on.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: rrspyder
Date Posted: December 18, 2002 at 8:56 AM

Alright, thanks Ill try that. Would I need any type of relay to tap into the wire or just straight from the alarm?

Thanks,

Kyle

Posted By: Velocity Motors
Date Posted: December 18, 2002 at 9:39 AM

You should be able to go straight from the alarm to the switch.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: rrspyder
Date Posted: December 18, 2002 at 10:08 AM

Alright, thanks. Also, is it ok if I have to ouput the flash wire to each component wire seperately such as connect the flash ouput to front left turn wire/ front right turn wire, etc.. From what I can tell it looks like when the switch is pushed it supplies voltage to each individual wire such as front right turn/ front left turn lights, etc..

Thanks,

Kyle

Print Page | Close Window