Program starter remote with no Hood Pin?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68287
Printed Date: May 07, 2025 at 9:47 AM

Topic: Program starter remote with no Hood Pin?

Posted By: atilla137
Subject: Program starter remote with no Hood Pin?
Date Posted: December 13, 2005 at 1:25 PM

I have a ProStart CT-3300 installed in my luxury 92 Tempo. My remote got soaked and stopped working so I have purchased a replacement remote and I am trying to program it. My problem is that there is no Hood Pin and the instructions all begin with flashing the hood pin. How can I program the remote without a hood pin?
Thanks in advance for any help you can give.

Replies:

Posted By: thepencil
Date Posted: December 13, 2005 at 3:01 PM

Ground the hoodpin grey wire. There is a Programming Assistance Button, which act like a hood pin that you can used. It's located on the side of the module.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: atilla137
Date Posted: December 13, 2005 at 7:55 PM

Thanks for your help.
It working fine now.

Print Page | Close Window