’99 Mercury Villager RS Problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68297
Printed Date: May 08, 2025 at 1:06 PM

Topic: ’99 Mercury Villager RS Problem

Posted By: Fastlearner
Subject: ’99 Mercury Villager RS Problem
Date Posted: December 13, 2005 at 4:28 PM

Working on a 1999 Mercury villager. Have everything hooked up right all the right wires. When we try to remote start it nothing happens. The acc. and ign wires all power up but the starter does not engage. The starter wires will get power when they need to but the starter doesn't engage. The hood pin is fine. the tach is fine. Have the second relay hooked up right. Everything is fine and gets power when needs it. It's just the damn starter doesn't engage. Help out soon please.

Replies:

Posted By: Fastlearner
Date Posted: December 13, 2005 at 5:21 PM

I'm installing a viper160xv Remote Start and Keyless.

Posted By: chris354
Date Posted: December 13, 2005 at 7:01 PM

Are you sure you have the right wire for the starter.If you do then check to make sure the purple has a good connection. Test the purple wire while cranking with key to make sure its connected good.

Posted By: Joe Neal
Date Posted: December 13, 2005 at 7:04 PM

Did you Power BOTH Starter wires??

Posted By: cntrylvr79
Date Posted: December 13, 2005 at 8:17 PM

Might want to make sure the ribbon harness is plugged in all the way too.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Print Page | Close Window