Print Page | Close Window

2002 Toyota Tundra, DEI Valet 561r Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68302
Printed Date: May 17, 2025 at 7:35 AM


Topic: 2002 Toyota Tundra, DEI Valet 561r Remote Start

Posted By: cporichie
Subject: 2002 Toyota Tundra, DEI Valet 561r Remote Start
Date Posted: December 13, 2005 at 5:13 PM

I know this is getting really crazy. i dont see much 2002 help, maybe because its the same as 2000 and 2001. Anyway can someone help me just match up what wires i need to connect in a DEI Valet 561r to a 2002 tundra. I have seen the diagrams but am not sure exactly for all the wires. I have NOTHING in my truck all i want is remote start. i dont have power windows or power locks or alarm. Any help will be appreciated and if must be can also be paid for.

Thanks




Replies:

Posted By: jacqueslacombe
Date Posted: December 14, 2005 at 1:39 AM

Hi! this is what you should need

wire               color                      location                              polarity

batterie          white                  ign  harness                             +

ign                 BLACK/ red            ign  harness                             +

starter           GREEN/ black       ign  harness                             +

acc                BLACK / YELLOW       ign  harness                             +

parklight       green                 driver kick panel                        +

brakes         GREEN / WHITE        driver kick panel                       +

tach           small   BLACK/ red          at  coil                                 ac



-------------
cocolaboy




Posted By: cporichie
Date Posted: December 17, 2005 at 5:52 AM
ok so i hooked it up ...everything but he tach and brake... and its not working. i cant figure it out. any more help would be extremely appreciated.




Posted By: Mike M2
Date Posted: December 17, 2005 at 8:43 AM
Well it's not gonna work without hooking up the tach wire.....

-------------
Mike M2
Tech Manager
CS Dealer Services





Print Page | Close Window