Hello everyone. i made a post asking for help about a week ago, thanks for the answer, but it didn't quite help out. the problem is how do i by pass the stock security system that comes on a 1997 honda accord 2 dr, the kind that cut's off the starter. if i just unplug the system, the car don't start. i wouldn't mind using the system in conjuction with the alarm i'm installing as long as when i disarm the alarm, the security system wil also deactivate. right now the doors do not unlock with the alarm, so i have to use the security transmitter. any help with wiring diagrams would be greatly appreciated.
-------------
It's better to ask a "STUPID" question...than to know a "STUPID" answer. :-)
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white |+ |ignition harness |
| STARTER|BLACK/ white |+ |ignition harness |
| IGNITION|BLACK / YELLOW |+ |ignition harness |
| ACCESSORY|yellow |+ |ignition harness |
| POWER LOCK|BLACK/ white *3 |- |gray conn. above fuse |
| POWER UNLOCK|orange *3 |- |box in blue tape |
| LOCK MOTOR|WHITE/ red | |drivers door harness |
| UNLOCK MOTOR|yellow | |drivers door harness |
| DISARM DEFEAT|yellow/red | |passenger door harness |
| PARKING LIGHTS +|RED / black *1 | |blue plug fuse box |
| HEADLIGHTS|blue |- |blue plug left of column |
| DOOR TRIGGER|blk/wht |- |gray plug right of column |
| DOME SUPERVISION|use door trigger | | |
| TRUNK/HATCH PIN|orange |- |gray plug right of column |
| FCTRY ALARM ARM|RED / yellow |- |passenger kick or alarm *2 |
|FCTRY ALRM DISARM|RED / blue |- |passenger kick or alarm *2 |
| TACHOMETER|blue | |at distributor |
| BRAKE WIRE|GREEN / WHITE |+ |brake switch |
| HORN TRIGGER|blu/red or grn/blu |- |steering column |
| WIPERS|blue |- |brown plug left of column |
| LF WINDOW UP/DN|RED / blu - RED / yel |A |in drivers door |
| RF WINDOW UP/DN|blu/yel - blu |A |driver door harness |
| LR WINDOW UP/DN|grn/blu - grn |A |driver door harness |
| RR WINDOW UP/DN|yel/blu - yel |A |driver door harness |
Notes:*1 Also a male blade terminal is available in the fusebox DKP. *2 Factory alarm is located under the passenger front seat. *3 SE models, use factory alarm arm wire for lock and factory alarm disarm wire for unlock.
hey magicone...where did you find this info...i'll give it a shot. thanks

-------------
It's better to ask a "STUPID" question...than to know a "STUPID" answer. :-)