2002 bmw 3251
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68316
Printed Date: May 16, 2025 at 5:11 AM
Topic: 2002 bmw 3251
Posted By: fdny136
Subject: 2002 bmw 3251
Date Posted: December 13, 2005 at 9:26 PM
just put in a boa 265b remote system that a customer recieved as a gift and had me install.pretty ez install needed a bypass module wired into the factory system all went well and I only used the r/s feature , which is what he requested.now he tells me when the car remote starts the lights flash and continue flashing while running until you place the key on or brake etc.should the parking lights flash or stay steady?also he is unable to use his factory f.o.b to unlock while it is remote started,can this be something I missed ?
Replies:
Posted By: mo12v
Date Posted: December 13, 2005 at 9:52 PM
If he starts the car with his key & Locks the Doors while sitting in it, is his FACTORY Remote able to UNLOCK the Doors??
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: redpeppers
Date Posted: December 13, 2005 at 11:51 PM
u can turn the parking light flash to a steady pulse in the programming settings....
-------------
Where theres is a wire there's a way.
Posted By: Ravendarat
Date Posted: December 14, 2005 at 12:49 AM
You can do a steady flash instead of pulse and As for the fob thing, BMW remotes are locked out when the vedhicle is running, you did nothing wrong, thats just the way the vehicle works. If he gets keyless entry added to the remote start then he can unlock the doors by remote when its running
-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
|