Print Page | Close Window

Astrostart 5204, 2006 Silverado Duramax

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68679
Printed Date: May 15, 2025 at 5:29 AM


Topic: Astrostart 5204, 2006 Silverado Duramax

Posted By: tbalt
Subject: Astrostart 5204, 2006 Silverado Duramax
Date Posted: December 18, 2005 at 10:01 PM

I just installed a 5204 Astrostart in my 2006 Silverado Duramax and it seems to be working correct.

My questions are:

-    When the "Wait to Start" light is on for the glow plugs is it a + or - signal on my truck?

-    And second I'm trying to hook up a Directed  556T timer to the Astrostart 5204 P10 connection. The timer module sends a (-) signal to the starter, but the installation manual from Astrostart does not give a wiring diragram for the connections to the P10 connector.   Can somebody help me through this?

Thanks




Replies:

Posted By: KarTuneMan
Date Posted: December 19, 2005 at 1:40 AM

You do not need the DEI part.........set your unit for NEG(-) glow plug found behind the cluster. DK.blue.,

Don't mix DEI crap.....with astro...good stuff..........K..!

For this truck you do NOT need the P-10 connector



-------------




Posted By: tbalt
Date Posted: December 19, 2005 at 9:23 AM

I do need the P10 plug if I want to hook up the timer.

I am out of range with the remote start and want it to start with the timer I have. Does anybody know the wiring pinout of the P10 plug on a Astrostart 5204.

Thanks





Posted By: KarTuneMan
Date Posted: December 19, 2005 at 12:15 PM

I see....use the astro RST-2...and just plug it in!

to use the DEI piece, youll need astro part # 310-903-271-01 its the harness that plugs into the p10 The pin is the #4 that gets the neg trigger (left to right)

Look at page 21 of the install manual



-------------




Posted By: tbalt
Date Posted: December 19, 2005 at 3:07 PM
Do you know where I can get the harness astro part # 310-903-271-01?




Posted By: KarTuneMan
Date Posted: December 19, 2005 at 3:12 PM
The shop you got the 5204 from should be able to get you one

-------------




Posted By: sparkie
Date Posted: December 19, 2005 at 8:00 PM
The dark blue wait to start wire at the cluster is in position A2 and is negative.

-------------
sparky





Print Page | Close Window