2001 Toyota 4runner remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68691
Printed Date: May 16, 2025 at 8:37 AM
Topic: 2001 Toyota 4runner remote start
Posted By: i_knill
Subject: 2001 Toyota 4runner remote start
Date Posted: December 19, 2005 at 12:38 AM
I am attempting to install a remote start add-on module (Omega RS4-LX) to the security system (Pursuit 9232) that came to my vehicle. The factory immobilizer is intact and I also have the Toyota/Lexus bypass kit. Does anyone have a wiring diagram for the bypass kit wires, also, the location to make the connections? I know these connections are between the ignition switch and the ECM, but where is the best location? Also, what are the proper wire colours? Thanks for the help! Ian
Replies:
Posted By: OhioMike1101
Date Posted: December 22, 2005 at 4:08 PM
sounds like you need instructions for your bypass.
We just did one today. DB-PKT from Omega and it worked perfect.
Posted By: i_knill
Date Posted: December 22, 2005 at 8:28 PM
I am installing the Omega RS-4LX remote start with the Omega DB-PKT. Where do you make the bypass wire connections? At the ignition harness or at the ECM (if ECM, where is that exactly)? I certainly do not want to disable my vehicle by screwing with the wrong wires!
Posted By: OhioMike1101
Date Posted: December 22, 2005 at 10:25 PM
You should go read about a 2002 Camry on Sounddomain.com in Security sense where the guy hooked up the bypass incorrectly and fried his factory transponder.... $800 fix. If you do not have the experience, I would take it to a shop to have installed. the wires you need to tap come directly from the factory transponder system coming out of the key cylinder.
Posted By: OhioMike1101
Date Posted: December 22, 2005 at 10:26 PM
Posted By: i_knill
Date Posted: December 22, 2005 at 10:29 PM
I have a fair amount of experience with wiring, just not with Toyota 4Runners specifically. I was hoping someone had a wiring diagram or something for the 4Runner, none of the wires seem to match the Omega DB-PKT instructions. If anyone has a verified list of wire colours for a 2001 Toyota 4Runner, I would appreciate it.
Posted By: OhioMike1101
Date Posted: December 22, 2005 at 10:40 PM
i_knill wrote:
I have a fair amount of experience with wiring, just not with Toyota 4Runners specifically. I was hoping someone had a wiring diagram or something for the 4Runner, none of the wires seem to match the Omega DB-PKT instructions. If anyone has a verified list of wire colours for a 2001 Toyota 4Runner, I would appreciate it.
The one I did today did, I used the DB_PKT also. It did not match ...... the instructions were wrong. The instructions for the HIGHLANDER were the ones. The wires match the highlander perfectly.
|