Print Page | Close Window

’97 GMC Keyless Entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68713
Printed Date: May 14, 2025 at 7:31 AM


Topic: ’97 GMC Keyless Entry

Posted By: lnbrgr78
Subject: ’97 GMC Keyless Entry
Date Posted: December 19, 2005 at 10:39 AM

Hey guys, need a quick bit of into here.  I am installing a remote start / keyless entry unit in a '97 GMC Full Size Pickup with factory keyless entry.  The fact that it has keyless entry tells me that it's a type A door lock system correct?  In this case, it requires a positive pulse to lock and unlock the door correct?  My final question is this, is the 500mA output on the keyless entry module enough to do this or will I have to wire relays to pulse the + lock +unlock?

Thanks in advance for all your help!

Adam




Replies:

Posted By: KarTuneMan
Date Posted: December 19, 2005 at 12:25 PM

posted_image

You will need relays wired like so!



-------------



Posted By: lnbrgr78
Date Posted: December 19, 2005 at 1:09 PM

Thanks, that's what I was leaning toward but wasn't 100% positive. 

Adam


Print Page | Close Window