Door lock/unlock moves window

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68818
Printed Date: May 15, 2025 at 2:55 AM

Topic: Door lock/unlock moves window

Posted By: gregb
Subject: Door lock/unlock moves window
Date Posted: December 20, 2005 at 4:49 PM

We have just installed a Pace Edwards electric bed cover on a 2004 Nissan Titan. The bed cover controller has -lock and -unlock outputs. We have connected them through diodes to the blue & red wires in the drivers door. Each time the unlock is depressed the window moves down and moves up each time the lock is depressed. Any ideas?

Replies:

Posted By: KarTuneMan
Date Posted: December 20, 2005 at 6:25 PM

I would try using 2 relays....Use the lock and unlock wires to "trigger" the relays for the loc/unlock on the bed cover.

-------------

Posted By: mobile1
Date Posted: December 20, 2005 at 6:48 PM

if you pulse the lock and unlock wires too long, they will roll the windows up and down. check the outputs and see how long of a pulse they send. If its more than a second (give or take) the windows will be activated.

Print Page | Close Window