Print Page | Close Window

2000 intrepid keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68821
Printed Date: May 13, 2025 at 7:06 PM


Topic: 2000 intrepid keyless entry

Posted By: stevenlusk
Subject: 2000 intrepid keyless entry
Date Posted: December 20, 2005 at 5:56 PM

could some one tell me if this will work or if not what would

relays: 87,87,85 and 86 are 12 volts, 86 is (-) lock from alarm and 85 is (-) unlock from alarm, 30 through a 2.7k ohm resistor for lock, and 30 through a 620 ohm resistor for unlock

if some would could tell me if this would work that would be great also if they could tell me what resistors would work if i cant find the exact ones, also is it possible to just run the resistores from the alarm leads or do i need relays




Replies:

Posted By: chris354
Date Posted: December 20, 2005 at 6:35 PM

You need 2 relays

Relay 1

85 - lock output of alarm

86 12 volt

30 ground

87 put a 2700 ohm resistor to cars WHITE/ green wire

Relay 2

85 - unlock output from alarm

86 12 volt

30 ground

87 put a 620 ohm resistor to cars WHITE/ green wire




Posted By: thepencil
Date Posted: December 21, 2005 at 10:14 AM
A picture is worth a thousand words.

-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image



Posted By: stevenlusk
Date Posted: December 23, 2005 at 10:28 AM
need a little help on wiring a trunk switch,i just need to know how to set up the relay for a positive trigger, and is a vf45f11p&b relay just a standard 30a relay or somthing special



Posted By: stevenlusk
Date Posted: December 23, 2005 at 11:08 AM
i need a  relay setup for a positive trigger trunk release



Posted By: the12volt
Date Posted: December 23, 2005 at 11:16 AM
Hi stevenlusk, have a peek here: https://www.the12volt.com/relays/page1.asp

-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window