2000 gmc seirra remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68841
Printed Date: May 28, 2024 at 4:21 AM

Topic: 2000 gmc seirra remote start

Posted By: dirtylooks
Subject: 2000 gmc seirra remote start
Date Posted: December 20, 2005 at 10:02 PM

im doing a remote start on a 2000 gmc seirra i have the bypass 555l for passlock 2 but this is my first pl2...my question is that i herd that if it does not program right after a few atempts you have to get it towed to gm...is it true...any info is welcomed

-------------
A way of life..

Replies:

Posted By: redpeppers
Date Posted: December 20, 2005 at 10:05 PM

just hook it up right and u dont have to worry about that.......it is easy to hook up.....and i have never had to have one that had to be towed. posted_image

-------------
Where theres is a wire there's a way.

Posted By: dirtylooks
Date Posted: December 20, 2005 at 10:08 PM

thank u that is what i wonrted to here question is there 1 wire i have to cut

-------------
A way of life..

Posted By: chris354
Date Posted: December 20, 2005 at 10:08 PM

I have never had a problem with that. My only suggestion would be to ground the black wire of the 555l in the kick panel instead of using the ground referance wire.

Posted By: dirtylooks
Date Posted: December 20, 2005 at 10:11 PM

what is the blue/black(-)status input wire and what does it go too

-------------
A way of life..

Posted By: chris354
Date Posted: December 20, 2005 at 10:20 PM

It will go to the ground while running wire on most remote starts if its a dei product it will be called the status output.

Print Page | Close Window