Dome light supervision/compustar 1wam4R
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68887
Printed Date: July 21, 2025 at 6:09 PM
Topic: Dome light supervision/compustar 1wam4R
Posted By: side show bob
Subject: Dome light supervision/compustar 1wam4R
Date Posted: December 21, 2005 at 4:17 PM
Hi, I am trying to connect the dome light supervision fuction of my Compustar 1wam4R (CM3000)into a 1992 Chev PU 2500. The wiring diagrams are quite strait forward but for some reason the violet wire in connector CN5 shows the opposite function as to what i need and what its supposed to do. It is normally closed and when i hit the unlock function on the remote it opens the circuit for 1 minute. When the system is Locked the circuit shows that it is closed. I tried the relay system that is outlined in the 'how to' pages in "the12volt" but no joy. I have chosen just before the convience switch(white wire)in the dimmer on the dash panel as an install point for the lead and the overhead light functions normally when a simple ground is applied. Everything else ive done works fine. Thanks SSB
-------------
Side Show Bob
Replies:
Posted By: Powermyster
Date Posted: December 21, 2005 at 4:23 PM
can you not get it right from the done light if a door trigger does't work
-------------
Why oh Why didn't i take the blue pill
Darren Power
|