01 Isuzu Rodeo, 1256M Ultrastart

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68969
Printed Date: September 16, 2025 at 7:52 AM

Topic: 01 Isuzu Rodeo, 1256M Ultrastart

Posted By: iskidoo
Subject: 01 Isuzu Rodeo, 1256M Ultrastart
Date Posted: December 22, 2005 at 5:03 PM

Hey folks, Installing a 1256M Ultrastart into an 01 Isuzu Rodeo later and wanted a heads up on the parking brake wire. Do I need to get it at the brake or is there a easier place to grab it like the passenger kick? Thanks for any help you can offer.

Steve

-------------
Steve G

Replies:

Posted By: KarTuneMan
Date Posted: December 22, 2005 at 5:57 PM

Pink/black at the brake switch NEG(-)

-------------

Posted By: iskidoo
Date Posted: December 22, 2005 at 6:41 PM

Thanks Gary, do you have any idea what the trick is with the clutch bypass. I only see a 2 wire connector on the front of the assembly that is smaller guage. But even when jumpered does not turn over. Only turns over when I held the clutch down. It seems as if maybe there is another switch not on the inside of the firewall??

-------------
Steve G

Posted By: iskidoo
Date Posted: December 22, 2005 at 7:02 PM

Nevermind, I found another switch that was obstructed from my view.

-------------
Steve G

Print Page | Close Window