2004 350Z alarm/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68976
Printed Date: September 16, 2025 at 7:14 AM
Topic: 2004 350Z alarm/remote start
Posted By: hardbodys
Subject: 2004 350Z alarm/remote start
Date Posted: December 22, 2005 at 6:36 PM
i am looking for an updated wireing diagram (alarm and remote start ) thanks everybody ------------- hardbodys
Replies:
Posted By: Craig3708
Date Posted: December 22, 2005 at 6:49 PM
| Nissan |
| 350 Z |
| 2003 - 2005 |
| | Remote Starter Wiring Colors and Notes | | Function | Vehicle Color | Location | | Start: | WHITE/ Red (+) | | | Ignition #1: | BLACK/ Red (+) | Ignition switch harness* | | Ignition #2: | | Ignition switch harness | | Ignition #3: | | Ignition switch harness | | Accessory: | WHITE/ Black (+) | Ignition switch harness | | Brake Light: | Pink/Blue (+) | | | Tach Signal: | | | | Parking Lights: | RED / Blue (+) | Drivers kick panel | | Headlights: | | | | Diesel Glow Plug: | N/A | | | Clutch Bypass Wire: | | | | Notes: | *This vehicle may be equipped with a Transponder Anti-Theft System. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. **This vehicle is equipped with two start wires. Both must be connected to remote starter wire in order for veh | | Alarm and Keyless Entry Wiring Colors and Notes | | Function | Vehicle Color | Location | | Constant +12 Volts: | WHITE/ Blue (+) | Ignition switch harness | | OEM Alarm Disarm: | No info. available | | | OEM Horn: | GREEN/ Black (-) | Steering column harness | | Power Lock: | Red (-) | Driver door module inside the door*** | | Power Unlock: | Lt.Blue (-) | Driver door module inside the door*** | | Trunk Release: | Pink (-) | Brown plug at the BCM**** | | Alarm Input Wire: | | | | Notes: | ***These are the driver door key cylinder wires, test the wires while turning the key in the driver door. See Note #201 Negative Trigger Door Locks. ****The Body Control Module (BCM) is in the drivers kick panel below the fuse box. |
------------- Craig
Posted By: hardbodys
Date Posted: December 22, 2005 at 7:10 PM
thanks but do you know if i will need a relay for the clutch switch ?
-------------
hardbodys
Posted By: Craig3708
Date Posted: December 22, 2005 at 7:18 PM
I'm not sure. Find the clutch switch and determined whether it is pos or neg. If your remote start unit has a neg output for the clutch and the clutch switch is neg , no you will not need a relay. If they are opposite then yes you will need to change the polarity through a relay.
-------------
Craig
Posted By: hardbodys
Date Posted: December 22, 2005 at 9:25 PM
thanks thats what i needed to know :) ------------- hardbodys
Posted By: Evolution-UK
Date Posted: December 23, 2005 at 2:06 AM
for the locking you dont have to go into the door. There are wires in the body->door harness that you can tap into. Open circuit-pos pulse. I cant remember the colors but they arent hard to find.
Posted By: hardbodys
Date Posted: December 28, 2005 at 5:42 PM
i have a VIPER 791XV alarm with remote start and the Z has 2 starter wire's but the alarm 1 starter side wire and 1 key side wire, what do i need to do to mke this work and have the 556UW BYPASS .
-------------
hardbodys
Posted By: hardbodys
Date Posted: December 28, 2005 at 10:40 PM
ok does any one got an diagram for the cluch bypass for remote start on 350z
-------------
hardbodys
Posted By: hardbodys
Date Posted: December 29, 2005 at 1:10 AM
thanks guy's for all your help with this project , like i asked before the only thing i need now is a more detailed clutch bypass disgram .
-------------
hardbodys
|