Print Page | Close Window

Compustar 2WSS-AS, 95 240SX

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68977
Printed Date: July 10, 2025 at 2:26 AM


Topic: Compustar 2WSS-AS, 95 240SX

Posted By: etm0r0n
Subject: Compustar 2WSS-AS, 95 240SX
Date Posted: December 22, 2005 at 6:48 PM

so i attempted to install the alarm on my car . first alarm on any car acually .

now the car arms and disarms fine and remote start is ok .

but i cannot get it into turbo mode . i think i did it right , there was only 1 wire coming out from the ebrake so i just spliced the ebrake wire from the alarm to that wire . everytime i try to set it too turbo mode the 2 way pager just chirps and the lock and parking lights blink . did i install something wrong here ?

also when i press the remote start , it seems the the car cranks are very short and it usually takes the car a second time to crank and then fully start . is there i way i can make it crank for a little bit longer ?

thank you




Replies:

Posted By: etm0r0n
Date Posted: December 24, 2005 at 6:54 AM

i installed everything i needed to use the turbo mode on my automatic but it wont go into turbo mode .

it would just chirp3 times and flash 3 times once i hit the III & ther IV button together * to activate turbo mode *

anyone know what i should do ? recheck ebrake wire or something ?

thank you






Print Page | Close Window