Print Page | Close Window

problems with 2106 astrostart

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69042
Printed Date: July 15, 2025 at 1:10 AM


Topic: problems with 2106 astrostart

Posted By: pcanne
Subject: problems with 2106 astrostart
Date Posted: December 23, 2005 at 2:23 PM

The other day at work I tryed to start my car up with the remote start so it could warm up, it wouldnt work. The power antenna would go up about half way and then go right back down. Then a couple days ago i though i somehow fized it because i pressed the alarm and shut it off and it worked for a day or so. now its doing the same thing and my other fix didnt work. could i be a loose wire somewhere? any help would be appreciated.



Replies:

Posted By: mobile1
Date Posted: December 23, 2005 at 5:18 PM

can you access the brain? if so how many flashes does the LED flash?

If you didn't install this, i would reccommend bringing it to where it was installed. they should be able to diagnose this for you.




Posted By: pcanne
Date Posted: December 23, 2005 at 11:19 PM
i didnt install it, it came on the car when i bought it. i bought it from a private party, not a dealer. i might be able to access the brain. where do you think it might be in a 1994 pontiac bonneville?



Posted By: pcanne
Date Posted: December 29, 2005 at 11:04 PM
okay, found the brain. led flashed 4 times until i re soldered all of the connection (guy who installed it did a pretty crappy job) and now it blinks twice and the brake wasnt depressed when i was doing it. what does a module overload mean?



Posted By: KarTuneMan
Date Posted: December 30, 2005 at 1:01 AM
Check your ground......if the resistance is to high.....   faulty ground.

-------------


Print Page | Close Window