2001 Ford F150 Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69060
Printed Date: May 20, 2024 at 10:11 PM

Topic: 2001 Ford F150 Remote Start

Posted By: ryman03
Subject: 2001 Ford F150 Remote Start
Date Posted: December 23, 2005 at 6:41 PM

I recently installed a remote start on my F150. The key will no longer start the vehicle unless the pass4 tronsponder module is disconnected and I do not understand the problem. The remote start works fine and it will drive when remote started first. But the key does not work in the ignition unless remotely started first. Any comments are greatly appreciated.

Thank you for any interest

-------------
RyMan

Replies:

Posted By: mo12v
Date Posted: December 23, 2005 at 6:50 PM

How do you have the PASS 4 hooked up? Is it Powered Up when the Key is turned ON?

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: ryman03
Date Posted: December 24, 2005 at 9:06 AM

The pass4 has an antenna loop which is hooked up around the ignition. It also has three wires coming from it.

Green- key sense inhibit- I hooked it to a black and pink wire right on ignition

Red (+)12 volts- I hooked up to the same 12 volt supply as the remote start module

Blue/white (-)Ignition- I grounded

The remote start works fine and starts the vehicle and then you can put the key in but you have to use the remote starter in order to operate the vehicle. Thenk you for your concern any more comments or suggestions would be greatly appreciated.

-------------
RyMan

Posted By: NowYaKnow
Date Posted: December 24, 2005 at 9:51 AM

Its because you have your bypass on at all times. You don't want to ground the blue/white wire. You want to run it to your remote starters (-) status output / active output / or ignition 3 negative output.

Mike

Posted By: ryman03
Date Posted: December 24, 2005 at 1:31 PM

NowYaKnow,

Thank you very much. I really appreciate the assistance. I just tried to hook it up and everything is working great now. Happy holidays to you and your family.

-------------
RyMan