2004 Acura TL with DEI 556UW

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69083
Printed Date: May 15, 2024 at 12:27 PM

Topic: 2004 Acura TL with DEI 556UW

Posted By: tbone587
Subject: 2004 Acura TL with DEI 556UW
Date Posted: December 23, 2005 at 11:15 PM

I am going to be putting in valet 561r remote start in an acura tl 04. For the dei 556uw module, Can i just leave it on the default mode and hook up the power, ground, and status? Or do I have to switch settings and hook up more wires?

Replies:

Posted By: 05gt
Date Posted: December 24, 2005 at 12:01 AM

just hook up power, ground, and the status wire

Posted By: xtremeaudio
Date Posted: December 24, 2005 at 1:41 AM

yes it only need 3 wire make it work that most easy way to bypass just use 556u

Posted By: gus1
Date Posted: December 25, 2005 at 1:37 AM

May need the green keysense wire........... depends if it likes seeing 2 keys at once or not.

Gus

-------------
Wherever I go, that is where I end up......

Print Page | Close Window