Logixstart Starter/Alarm Problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69084
Printed Date: July 14, 2025 at 6:47 PM
Topic: Logixstart Starter/Alarm Problems
Posted By: bagged20escalad
Subject: Logixstart Starter/Alarm Problems
Date Posted: December 24, 2005 at 12:26 AM
Im installing a Logixstart LSA9624 Remote Car Starter / Alarm in my 1987 Chevy Suburban. On The Alarm it has 2 large Wiring Harness Connectors, and a few other smaller ones. The 1 Main 1 for the Starter wires, and 1 for all the other things like trigger inputs & parklights etc. Then others for power locks, antenna, etc. Anyways, I hooked the wires up accordingly using the installation manual and the wiring diagram for the truck off here. Anyways, If I only plug in the harness that has the wires for the starter, The truck will automatically start up, i can shut it off using the remote, but then it will start rite back up again, and the only way to shut it off, is to put the key in, and shut the engine off. If I hook up the other main harness with all the trigger wires etc, the alarm will start to flash the parking lights all werid, the siren makes werid chirping sounds, and the remote start will not work and u cant arm or disarm the alarm, Does anyone have any clues?
Replies:
Posted By: bagged20escalad
Date Posted: December 24, 2005 at 5:32 PM
Okay, UPDATE! I switched a couplewires around here & there. Now ih I hook up the main harness with the starter wires, nothing happens. As soon as I hook up the other harness, the alarm starts to go off. I can push the arm button, and it will stop, as soon as I push arm or unarm again, it starts goin off, but not normally, its like a chirping sounds it skips and stuff, if I turn the key in the on posistion it takes all the power away from the alarm, the siren & everything stop,as soon as I turn the key off comes right back again. Anyone got any ideas?
Posted By: bagged20escalad
Date Posted: December 26, 2005 at 1:00 PM
So does anyone have any idea what could casue this problem? I cant figure it out, im stumped.
Posted By: bagged20escalad
Date Posted: December 27, 2005 at 2:13 PM
Alright, Ive gone over the wiring liek 10x now, I dont think there is a problem with the way I have it hooked up. Could it possibly be a problem with the programming in the alarm or transmitter? Could someone please give me some feedback.
Posted By: bagged20escalad
Date Posted: December 28, 2005 at 8:53 PM
Is anyone on here going to awsner me? What kind of a forum is this? Sorry I Hate to be annoying, but im used to other forums and usually getting atleast 1 response within 24 hours.
Posted By: bagged20escalad
Date Posted: December 31, 2005 at 12:16 AM
Posted By: bagged20escalad
Date Posted: January 03, 2006 at 1:42 AM
This sux, Ive had my Dash ripped apart for like almost 2 weeks. I cant seem to figure out what the hell is wrong with it. Does nobody have any ideas at all.
|