2006 G6 Remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69210
Printed Date: April 29, 2024 at 12:26 PM

Topic: 2006 G6 Remote starter

Posted By: peppy
Subject: 2006 G6 Remote starter
Date Posted: December 26, 2005 at 12:29 PM

I need more info on the ignition wire & access. wire hookups. Never dealt with a car that had no starter wire before

Iam installing an Autopage RS- 625 with a Pats Gm 2 Transponder

Replies:

Posted By: peppy
Date Posted: December 26, 2005 at 12:32 PM

Sorry had a typo , its an Autopge RS- 615 with the Pats GM 2 Transponder

Posted By: tampa77
Date Posted: December 26, 2005 at 7:43 PM

I have never heard of no starter wire? Anyway follow this link, has all data and a relay digram to get it going.

Hope it helps, never done one before.

https://www.directwholesale.net/diagrams/diagram.asp?ModelID=19159&MakeID=35&link=BULLDOG

Tampa77

Posted By: uffdog
Date Posted: December 26, 2005 at 7:55 PM

You can also pick up some tips by reading some of the Colorado installs ,I believe it also does not use a starter wire , it don't hurt to read read read ,before you burn out or fry any of those expensive ecm,bcm etc

-------------
RFD

Posted By: peppy
Date Posted: December 27, 2005 at 10:54 AM

I need confirmation that I should use the 1 wire hookup to the white wire using 2 # 775 relays & a 1500 ohm resistor for unlock. If this is not correct please advise.

Posted By: tampa77
Date Posted: December 27, 2005 at 12:12 PM

One wire is right.

Follow the digram and you should be all set. This is similiar to multiplex sytstems and is not uncommon at all.

Tampa77

Posted By: peppy
Date Posted: December 28, 2005 at 9:24 PM

Thanks everyone for your help & tips. Finished the install & everything works great

Print Page | Close Window