Viper 790XV progressive door unlock
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69226
Printed Date: June 10, 2024 at 9:42 AM
Topic: Viper 790XV progressive door unlock
Posted By: blurr
Subject: Viper 790XV progressive door unlock
Date Posted: December 26, 2005 at 6:01 PM
I have a viper 790xv installed that I recently deleted all transmitters and then reprogrammed the remotes. When I did this, I lost my progressive door unlock. Can this be reprogrammed using the valet button or will I have to take it back to the installer?
Replies:
Posted By: Mike M2
Date Posted: December 26, 2005 at 8:46 PM
There is no programming to turn 2 stage unlock on or off. It simply works on the second press of the disarm button, sending a pulse out on the lt. blue wire on the secondary harness. Was your 2nd stage of unlock on the same button as disarm? Did you reprogram your remote to the default setting(feature 1)?
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: blurr
Date Posted: December 27, 2005 at 9:13 AM
Yes, the second stage of unlock was on the disarm button. When I reprogrammed the remotes, I used channel 8 which I was told to do when using a DEI 472V remote. Thanks for your response!
|