RS300 Crimestopper Remote Starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69235
Printed Date: April 28, 2024 at 1:06 AM

Topic: RS300 Crimestopper Remote Starter

Posted By: ted50
Subject: RS300 Crimestopper Remote Starter
Date Posted: December 26, 2005 at 7:41 PM

I purchased a RS300 Crimestopper remote stater for my Ford F250 Super Duty Diesel pickup. The wiring diagram for the 2004 is the same as 2002-2005 but both Crimestopper and Bulldog websites say their T-harness is only good to model year 2003. I would like to know if anyone has purchased the harness and tried it on a 2004. If the wiring diagram is the same then the only thing they may have changed would be the connector and I don't know why they would do that. Any help would be appreciated, I would like to use a T-harness to cut installation time.

-------------
Ted50

Replies:

Posted By: Haku
Date Posted: December 26, 2005 at 7:46 PM

On your truck, the T-harness really doesnt save alot of time. The wires you need to get to in the ignition harness are very easy to get to, and lots of room to solder.

Hak

-------------
Hak

Siemens Autostart

Posted By: indyaudioguy
Date Posted: December 31, 2005 at 1:30 PM

I agree with Hak. T-Harnesses, in general, are not beneficial. Some are too expensive, hard to connect, and most only give you access to about 5 of the wires you will need anyway. We stopped using them a few years ago!