97 monte carlo, Avistart 3200

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69303
Printed Date: May 02, 2024 at 3:32 AM

Topic: 97 monte carlo, Avistart 3200

Posted By: duoproductionx
Subject: 97 monte carlo, Avistart 3200
Date Posted: December 27, 2005 at 2:02 PM

alright label me n00b of the year, first time doing an 'alarm install' the only function i plan to use on it is the keyless entry, on an AVISTART 3200(until i get the passlock override for the remote starter part), i have all wiring diagrams for the unit however, few questions. what kind of method do the lock switch use? its got 4 wires blue orange white and something else if i remember correctly. other main question, where are you supposed to mount the fuseblock looking ends where you wiring the inputs and outputs? much appreachated if anyone can help, flame me if this is to dumb of a question! my expertise lies elsewhere.

-------------
97 Monte Carlo
CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

Replies:

Posted By: jayyzr
Date Posted: December 27, 2005 at 2:29 PM

as for the door locks it should be the Light Blue to lock and white to unlock (requires a + trigger) ALWAYS TEST WIRES w/ a Digital Multimeter

POWER LOCK	LIGHT BLUE (TYPE A)	IN DRIVERS KICK PANEL
POWER UNLOCK	WHITE (TYPE A)	IN DRIVERS KICK PANEL

-------------
Taking It 1 Wire @ A Time...

Posted By: duoproductionx
Date Posted: December 27, 2005 at 4:18 PM

thanks for the info, my haynes manual says the locks flip on a negative pulse, ill have to get a decent digi meter lol

-------------
97 Monte Carlo
CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

Posted By: duoproductionx
Date Posted: December 28, 2005 at 7:10 PM

what is type A wire? theres about 4 light blue wires down there only one white

-------------
97 Monte Carlo
CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

Posted By: mo12v
Date Posted: December 28, 2005 at 7:35 PM

Positive Pulse

Power Lock	L BLUE +	20 PIN CONNECTOR LOW
Power Unlock	WHITE +	IN DRIVER KICK PANEL

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: duoproductionx
Date Posted: December 28, 2005 at 8:34 PM

ok i figured out which was which, hooked it up to the fuse looking harness, got the units power and ground hooked up, im trying to program it just for the locks, it just blinks the LED when i push the "arm" button
and makes a series of clicking noises when i press the "disarm" button

-------------
97 Monte Carlo
CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

Posted By: jayyzr
Date Posted: December 28, 2005 at 9:14 PM

so you have the systems Lock & unlock (-) Pulse wires hooked up to a relay to provide a Positive trigger or you just connected them w/out a relay???

-------------
Taking It 1 Wire @ A Time...

Posted By: duoproductionx
Date Posted: December 28, 2005 at 9:19 PM

theyre hooked up to a relay to make a positive trigger

-------------
97 Monte Carlo
CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

Posted By: jayyzr
Date Posted: December 28, 2005 at 9:44 PM

I would just unplug the unit make sure you have a nice clean ground( no paint or rust) and 2x chk lock/unlock wires w/ ur DMM you should have a 0 then when triggered goes to a positive, chk the wiring of ur Relay,

-------------
Taking It 1 Wire @ A Time...

Posted By: duoproductionx
Date Posted: December 28, 2005 at 9:44 PM

i know its the right wires, i dont have a digimeter so i went with the cut and pray option, i cut the white and the driver door could no longer unlock and went i did the light blue it couldnt lock either, passenger side still works thankfully

-------------
97 Monte Carlo
CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

Posted By: duoproductionx
Date Posted: December 28, 2005 at 9:59 PM

Posted By: duoproductionx
Date Posted: December 28, 2005 at 10:01 PM

wow my post was just lost...anyway https://www.the12volt.com/doorlocks/page3.asp#3wp i used that as my diagram, the unit is grounded well, do the relays need to be grounded? theyre just sitting on bare metal right now

also the unit responds to the remote, any possibility that the problem is with the programming? i cant get the valet button to do what the manual says it should act like
IE, Key on, press valet number of times 1-9 to choose program, then press and hold.

-------------
97 Monte Carlo
CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.