Print Page | Close Window

2005 Toyota Sequoia, Viper 160XV

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69358
Printed Date: July 18, 2025 at 12:01 AM


Topic: 2005 Toyota Sequoia, Viper 160XV

Posted By: the_hawk_ca
Subject: 2005 Toyota Sequoia, Viper 160XV
Date Posted: December 28, 2005 at 12:26 AM

Hi,

I am installing a Viper 160XV remote start into a 2005 Toyota Sequoia.  Per the wiring diagram I have seen, I need to use diodes to separate the door locks.  Can anyone explain how to do this and/or provide me with any hints that would make my life any easier?

Thank you,

DH




Replies:

Posted By: Hornshockey
Date Posted: December 28, 2005 at 1:42 AM
you got it; couple diodes and a relay; in the door. check it out here: https://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1070.pdf

-------------
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.


Print Page | Close Window