2005 Chevy Uplander Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69368
Printed Date: June 12, 2024 at 12:48 AM

Topic: 2005 Chevy Uplander Remote Start

Posted By: tbird2340
Subject: 2005 Chevy Uplander Remote Start
Date Posted: December 28, 2005 at 8:05 AM

I'm in the process of doing a remote starter on a 2005 Chevy Uplander.

1. I'm using a GMBP to bypass the Passkey 3. It says in to hook up the "Blue Fuel Enable Line" but I don't see any blue wire coming out of the PK3 module. I only have:

Pink
WHITE/ Black
Yellow
WHITE/ Black
Brown
Black
Green

The GMBP directions have:

Grey - LED
Violet - Data Output
Black - Ground
Orange - 12V
Blue - Fuel Enable
Pink - Ignition

So I'm not sure what to do here.. The directions show 6 wires coming out of the PK3 module while there is acutally 7 and they are all different colors then the directions...

Replies:

Posted By: kgerry
Date Posted: December 28, 2005 at 9:27 AM

you should be using the instructions for an install 1 on the uplander... not install 3

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: tbird2340
Date Posted: December 28, 2005 at 9:37 AM

I thought install 1 was for Passlock 2.. This van has Passkey 3 and I'm using install 2. That's not correct??

Posted By: tbird2340
Date Posted: December 28, 2005 at 10:09 AM

I see what I did now.. I didn't see there was an install "2" and I just seen install 3 gm passkey 3 on the bottom but that is just for specific models.

Thanks

Posted By: kgerry
Date Posted: December 28, 2005 at 12:11 PM

no problem... install 1 and 2 are the exact same connections.... 1 being PL II & 2 being PK III

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979