alarm wiring advice needed

iv just bought a alarm for my car and began wiring it in, i understand everything apart from 2 things which im hoping you will be able to help me with, heres my problems:

the wiring diagram says to wrap a wire around the high coil? what is the high coil?

also on the engine cut off circuit im not sure where the relay wires to and also not sure of the high coil again

iv attached a pic of the wiring diagram and hope someone can help

cheers

scott

https://img264.imageshack.us/img264/8782/alarmwiringdiagram2yl.jpg

Wow, that's some funky looking stuff. I think what they mean is to wrap the highcoil wire around the coil wire, between the distributor and coil. It must pickup the energy in the wire like a timing light does. Here in the USA we use a tach wire instead. As for the other kill relay, they want you to cut the positive wire going to the coil and run it thru the relay. This is to prevent it from getting power to the coil when armed. In the USA we use starter kills instead of ignition kills.

its a fiat cinquecento sporting, it doesnt have a dist, just 2 coil packs

what do i do with the wires then?

thanks