Ultrastart 1256m in 01 honda civic
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69539
Printed Date: May 13, 2025 at 6:37 PM
Topic: Ultrastart 1256m in 01 honda civic
Posted By: mudnut
Subject: Ultrastart 1256m in 01 honda civic
Date Posted: December 29, 2005 at 10:15 PM
I am starting to put a remote start system in my car, and on the front of the install manual, it states to make sure the "system is in service mode". Are they speaking of the car or the remote start unit ? and how exactly do I do that ?
Thanks for any help
Replies:
Posted By: jmacf14
Date Posted: December 29, 2005 at 11:50 PM
ive installed 3 ultrastart r/s alarms (2250, 2256m) and all 3 of them referred to service mode as a setting the user activates on the alarm after it is installed, to disable the remote start functions while the car is being serviced.(i assume to prevent accidental start) these alarms are very easy to install, and are quite user friendly. I have had great success with them. just follow the basic "recommended installation procedures usually on the 3rd or 4th page. good luck. hope it helps.
-------------
jmacf14
Posted By: mudnut
Date Posted: January 01, 2006 at 6:36 PM
Thanks Jmac. I was pretty sure that was what they were talking about. I also remembering reading about it somewhere, maybe it was in the user manual, not the install manual. I just thought it was strange to put that on the front of the install manual. But then again, it's my first time, so what do I know. Thanks again.
Posted By: jmacf14
Date Posted: January 01, 2006 at 7:15 PM
no prob, i hope it helped. good luck
-------------
jmacf14
|