Print Page | Close Window

Priority Unlock Wiring (Driver's Door)

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6955
Printed Date: July 18, 2025 at 3:30 PM


Topic: Priority Unlock Wiring (Driver's Door)

Posted By: $Bill
Subject: Priority Unlock Wiring (Driver's Door)
Date Posted: December 21, 2002 at 9:44 AM

How do you wire priority unlock on a Remote Start System that has pulsed unlock, where the RS uses what appears to be the same wire to send both pulses? (Astrostart RS 2106XR model)  I understand the isolation of the FR door unlock/lock actuator, but not the relay wiring/system programming.

Let me know. THANK YOU in advance and Happy Holidays

Bill




Replies:

Posted By: JWorm
Date Posted: December 21, 2002 at 6:19 PM
Usually you must have a system capable of priority unlock. It will have two seperate unlock outputs. The systems we use at my work require you to hold the unlock button for 3 seconds for trunk release. If the customer wants priority unlock, we take the unlock wire and hook it to the drivers door unlock wire (thru a relay) and then we connect the trunk release to the vehicle unlock wire. Customer presses unlock 1 time and drivers door unlocks. If they hold unlock it will do the drivers door first and then 2 seconds later will do the other doors.

Not familiar with Astrostart except the ones I have torn out of customers cars, so I'm not sure how you could do it.



Posted By: $Bill
Date Posted: December 21, 2002 at 8:08 PM
Thank you JW


Print Page | Close Window