clifford avantguard 4
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69574
Printed Date: May 14, 2024 at 1:58 PM
Topic: clifford avantguard 4
Posted By: BIGPLC
Subject: clifford avantguard 4
Date Posted: December 30, 2005 at 11:08 AM
who has installed this alarm?
Replies:
Posted By: ripley01
Date Posted: December 30, 2005 at 1:35 PM
I'm at it. Maybe I can help, what's your issue?
Posted By: Powermyster
Date Posted: December 30, 2005 at 2:11 PM
what you looking to know exactly..
-------------
Why oh Why didn't i take the blue pill
Darren Power
Posted By: Forseti
Date Posted: December 30, 2005 at 4:51 PM
I am installing it right now into my 03 Dakota R/T.. what ya need to know ?
Posted By: BIGPLC
Date Posted: December 30, 2005 at 9:36 PM
no problems yet ive had the alarm and im setting up to install it and ive heard theres lots of problems with it. how long have you guys been installing this alarm?
Posted By: Forseti
Date Posted: December 30, 2005 at 10:22 PM
I have installed baout 10 or so Avantguard 4 units. I have never had a problem with them ....
Posted By: scirocco16v
Date Posted: December 30, 2005 at 10:55 PM
cliffords are as good as the installation. I personally own three of them with all the accesories and have two other close friends with them and never see issues, they have been installed for years. I have also installed many others with no major problems. Install it well and you will see what a beautifully complex and reliable alarm it is. One thing though, watch out for the delayed accesory and heat wires from the intellistart on that vehicle. It could cause a check engine light if you put a delay on the BLACK/ orange ignition wire. you need a relay to avoid it. Let me know if you need help.
Posted By: BIGPLC
Date Posted: December 31, 2005 at 8:27 PM
how many hours did it take to install
Posted By: Forseti
Date Posted: December 31, 2005 at 8:38 PM
It depends on the installer.. i like to solder all my connections so it takes a bit longer than crimped connections..... it also depends how easy it is to get to the wires you need.... how far you have to run the harness from the AVG4(where you hid it) to you ignition system its about a 2 days on a real complex system ... about 1 1/4 to 1 1/2 days on a simple truck
Posted By: BIGPLC
Date Posted: December 31, 2005 at 8:39 PM
i have a rsx type s manual rookie installer
Posted By: Forseti
Date Posted: December 31, 2005 at 11:58 PM
Might take ya a bit due to cramped space ..... take your time ..... fully read the install info.... hunt out a good spot to hide the units... make a plan before you start.... do your ignition/starter connections last... so if you have to you will be able to drive your car with it only be half installed
Posted By: BIGPLC
Date Posted: January 01, 2006 at 11:08 AM
do i need any other supplies besides what the car alarm has and tools? should i need wires or anything else
Posted By: BIGPLC
Date Posted: January 02, 2006 at 6:30 AM
bump
|