Print Page | Close Window

Removing Aftermarket Alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69607
Printed Date: May 11, 2025 at 9:10 PM


Topic: Removing Aftermarket Alarm

Posted By: blakeo
Subject: Removing Aftermarket Alarm
Date Posted: December 30, 2005 at 9:07 PM

Hello all,

I just purchased a used 2001 Dodge Durango R/T model with a (or what appears to be) passive alarm system (it has the transponder key).  It came with a Karr 2040A alarm system.  This system is quite irritating and I would much rather have just factory stuff.  (Keyless and the passive? security system)  Maybe in the future I will have a remote starter added, but currently cannot with this system.

Does anyone know, is this system easily removed or for now just disabled?  I called the dealer and they won't touch it because its aftermarket, and I can't find a Karr dealer around my area.  (The truck is the from west coast, and I am in Ohio.)

Does anyone have any suggestions?

Thanks,

Blake




Replies:

Posted By: fingaz22
Date Posted: December 30, 2005 at 9:16 PM
i would suggest if you have no prior experince with 12volt then get it to a pro. but it sounds like you have a knlodge of the system. whats stopping you? when removing an after market alarm you need to remove all after market equipment and reconnecting to it origanal position via solder and proper insolation.

-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs




Print Page | Close Window