99 civic, 791xv, valet 561r
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69644
Printed Date: May 15, 2024 at 10:30 PM
Topic: 99 civic, 791xv, valet 561r
Posted By: mobilecustoms
Subject: 99 civic, 791xv, valet 561r
Date Posted: December 29, 2005 at 9:35 AM
i have a 791xv viper and the externbal shock sensor. I have the door trigger for the trunk on the zone 4 hooked up. How would the 506t work? How is it wired, plug and play? I read that it will report on zone 4, what happend when the trunk is triggered? Or do i get one or the other?
Replies:
Posted By: mobilecustoms
Date Posted: December 29, 2005 at 11:26 AM
i have a 791xv and a valet 561r and have the rear defroster wire hooked up in the car to thge defroster wire of the modules. Is there a way to turn off and on the defroster with the remote?
Posted By: robdog1969
Date Posted: December 29, 2005 at 1:38 PM
by using a seporate channel of of the alarm with a latching relay using ing for sorce of pwr...if you dont have an extra channel split one by using dome lt. survellance wire it gives you a 30 sec window
-------------
over 20 years of experience in the 12 volt industry
Posted By: Teamrf
Date Posted: December 29, 2005 at 3:36 PM
The trunk should have its on zone. Hook your trunk up to the blue wire off the alarm. That should be the instant trigger alarm. ------------- ~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
Posted By: mobilecustoms
Date Posted: December 29, 2005 at 7:43 PM
i have the trunk hooked up to the h1/6 blue multiplexed input zone 4
Posted By: mobilecustoms
Date Posted: December 31, 2005 at 7:34 AM
i have a 99 civic lx and want the facotry remote to open the doors when the car is running. I have it hooked up to the dei valet 561r to start the car with three pulses to the lock on the remote. Once running the remote is disabled. Can i wire a relay to keep the module running with the car?
Posted By: Mike M2
Date Posted: December 31, 2005 at 7:41 AM
That year civic you can do this with. In the drivers kickpanel is the keyless entry module. Find it and use a DVM to locate the ignition wire in the plug. Cut it and the remotes will work while running. Sorry, did it a hundred times but just can't remember the color. It may be the same as the ignition switch, BLACK / YELLOW.
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: mobilecustoms
Date Posted: December 31, 2005 at 3:20 PM
does anybody know the wire? before i start. it is snowing outside right now. I will test tomorrow when it stops.
Posted By: mobilecustoms
Date Posted: January 01, 2006 at 8:02 PM
it was the BLACK / YELLOW wire cut it and it works great! thanks!
on a 1998 windstar gl this should be the same also right?
|