Print Page | Close Window

98 Ford Explorer Remote Start Problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69686
Printed Date: June 11, 2024 at 12:27 PM


Topic: 98 Ford Explorer Remote Start Problem

Posted By: nnegrini
Subject: 98 Ford Explorer Remote Start Problem
Date Posted: December 31, 2005 at 4:32 PM

I am putting a Avistart 4400 in a 98 Explorer.  I have everything hooked up and the remote start just cranks (it never fires).  It has the 555f installed, to I not have it learned correctly.  Any ideas??  I am assuming it is the 555f, could it have something to do with the Factory Alarm??

Thanks




Replies:

Posted By: catalin capota
Date Posted: December 31, 2005 at 4:35 PM
Lights turning on in the dash? Could be an ignition problem?

-------------



Posted By: KarTuneMan
Date Posted: December 31, 2005 at 5:28 PM

Check the location of the "pellet" on the key cylinder. ALSO...will it start with the key in the ignition? The 555f is just the ignition imobilizer bypass, has nothing to do with the factory security.



-------------



Posted By: nnegrini
Date Posted: December 31, 2005 at 7:25 PM
It starts fine with the key in the ingition, I have to work on the 555f any suggestions on programing tricks??  Thanks in advance


Print Page | Close Window