Print Page | Close Window

2000 isuzu rodeo factory keyless bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69702
Printed Date: July 20, 2025 at 1:54 AM


Topic: 2000 isuzu rodeo factory keyless bypass

Posted By: FOCUS316
Subject: 2000 isuzu rodeo factory keyless bypass
Date Posted: December 31, 2005 at 9:10 PM

i am installing a panther ps-combo on a 2000 isuzu rodeo. whenever i disarm the ps-combo it is setting off the factory alarm. it didn't start until I was testing the shock sensor. the ps-combo went off and then the fatory alarm went off. it is now doing it every time I unlock the door. the alarm has a factory disarm wire. i connected it to the yellow/blue wire in the white connector in the kick panel but nothing happened.if you have any info it would be greatly appreciated.



-------------
Nathan Stoker



Replies:

Posted By: Joe Neal
Date Posted: December 31, 2005 at 10:06 PM
You need to trigger UNLOCK & DisArm at the same time



Posted By: goose32
Date Posted: January 04, 2006 at 10:36 AM
Joe Neal wrote:
You need to trigger UNLOCK & DisArm at the same time


How do you trigger them both at the same time could you explain in a little bit more detail ?


Print Page | Close Window