Starter kill & anti-grind relay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69717
Printed Date: July 19, 2025 at 3:08 AM

Topic: Starter kill & anti-grind relay

Posted By: bigreddastud
Subject: Starter kill & anti-grind relay
Date Posted: January 01, 2006 at 12:55 AM

I am trying to put both a starter kill and anti-grind protection relay together on my 1996 Honda Accord, but want to double-check if this is the correct way to wire it up. I will be cutting the starter wire and putting this in between the 2 halves.

Any comments are appreciated.

posted_image

Replies:

Posted By: KarTuneMan
Date Posted: January 01, 2006 at 3:32 AM

Holly cow....thats a coool diagram.................

-------------

Posted By: jacqueslacombe
Date Posted: January 01, 2006 at 3:52 AM

HI! the ground when running and ground when armed can be attach together it will do the same job (you will save a relais)

-------------
cocolaboy

Posted By: rksterling
Date Posted: January 01, 2006 at 10:03 AM

cocolaboy is correct. Starter Kill and Anti Grind are doing the same thing....... Disabling the starter when running. Combine the grounds and use one relay.

Nice Autocad drawing! If you updated it and reposted, I am sure many would find it useful.

Print Page | Close Window