Print Page | Close Window

99 Dodge Ram door locks?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69748
Printed Date: July 21, 2025 at 4:34 AM


Topic: 99 Dodge Ram door locks?

Posted By: roadtech 50
Subject: 99 Dodge Ram door locks?
Date Posted: January 01, 2006 at 2:30 PM

This is my 2nd post because I screwed up the first one so bad. I installed a remote starter on this vehicle (prostart CT 3300) no problem, works great. The power door locks require 12 volts to activate OK, the start module sends -pulse OK, installed two SPDT relays as per diagram to invert polarity. The problem is the door locks don't work with the remote, they will work if I touch my grounded testlight to the - inputs on the relays. Here's my wiring diagram for locks. Ok forget the diagram, but it's wired like the 5 wire alternating 12 volts positive door locks diagram on this site. I tried measuring the negative pulse coming from the start module to the relay. Could not get any  current, negative or positive. I think I will return the unit to the store for another one.One more thing, how do you cut and paste to this site?



Replies:

Posted By: mo12v
Date Posted: January 01, 2006 at 7:55 PM

One more thing, how do you cut and paste to this site?

Like that...............

Slide your Mouse, with Left Button down, across the Item & then press right Button & copy

If you can trigger Relays with Test light.....Sounds like you are not getting Pulse from Unit



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.


Print Page | Close Window