aerostar door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69776
Printed Date: May 14, 2024 at 1:26 AM

Topic: aerostar door locks

Posted By: vtech069
Subject: aerostar door locks
Date Posted: January 01, 2006 at 6:44 PM

hello can someone guide me on how to wire up the pwr door lock on a 1995 aerostar. wiring diagram says it is a reveese polority door lock system. so how do i hool that up.

thank you

Replies:

Posted By: fingaz22
Date Posted: January 01, 2006 at 6:58 PM

that means they rest at ground and when the switched is pressed up or down it will send a postive to it's respected side of the actuator.

what is it that you exsactly wiring? the whole system?

-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs

Posted By: jmacf14
Date Posted: January 01, 2006 at 7:04 PM

you need a couple of relays, run fused 12 volt constant to terminals 87 and 85 on the realays. then on the first relay run the green wire from alarm to terminal 86. the blue wire from alarm(lock and unlock blue and green is what im referring to) will go to terminal 86 on the second relay. then on the first relay(with green wire) run a wire from terminal 87a and 30 to the vehicle lock wire. cut the lock wire, 87a goes to the lock switch side of the cut wire, and 30 goes to the other part of the cut wire. now, cut the unlock wire and on the second relay(with blue wire) run 87a to the switch side of the wire, and 30 to the other part of the wire. i hope that helps

-------------
jmacf14