Viper 160XV Memory Seat
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69925
Printed Date: September 21, 2025 at 7:54 AM
Topic: Viper 160XV Memory Seat
Posted By: xxmattfxx
Subject: Viper 160XV Memory Seat
Date Posted: January 03, 2006 at 10:02 AM
I am attempting to hook up the memory seat to be linked to channel 2 and 4. But the problem is that I can not get the brain to distinguish between the two remotes, anything I program to one of them...it programs to both. Does this viper unit support the ability to have two different setting depending on which remote you use?
Replies:
Posted By: gus1
Date Posted: January 03, 2006 at 10:08 AM
Yes. The beauty of ESP2.... up to 4 different remotes with their own settings. Having a bitwriter helps.
Gus
-------------
Wherever I go, that is where I end up......
Posted By: xxmattfxx
Date Posted: January 03, 2006 at 11:13 AM
That's the problem, it won't recognize the remotes as being different. I have a bitwriter v2.0 but it says it's an unrecognized module when I plug it in.
Posted By: gus1
Date Posted: January 03, 2006 at 1:46 PM
Interesting...... may need to update the bitwriter. It it one of the new 160XV's with the programmable start delay?
You should be able to program using the valet switch and LED as well....
Gus
-------------
Wherever I go, that is where I end up......
Posted By: kgerry
Date Posted: January 03, 2006 at 1:56 PM
when you set up features choose a remote and learn it as remote 1 then program your other features as remote 2.... if you program to 0 it learns to ALL remotes.. but it is very easy to program remote specific features....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: xxmattfxx
Date Posted: January 03, 2006 at 2:13 PM
but my bitwriter isn't working with this unit, and yes it is one of the new viper's...so that may be the reason
Posted By: cntrylvr79
Date Posted: January 03, 2006 at 8:38 PM
You need to update the bitwriter to be able to program the new viper I think the newest version is 2.2 ------------- Cause I'm So white and nerdy...
First Class Certi-fried installer
Posted By: xtremca2003
Date Posted: January 03, 2006 at 10:07 PM
You can buy the update chips for the bitwritter for about 10bucks. Do a search on the net.
Chris
Posted By: xxmattfxx
Date Posted: January 04, 2006 at 9:54 AM
I can only find v2.0 on the net, and that's the version I already have that doesn't recognize the module
|