chrysler van /autopage 855LCD problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69932
Printed Date: September 21, 2025 at 3:23 AM
Topic: chrysler van /autopage 855LCD problems
Posted By: simonmai
Subject: chrysler van /autopage 855LCD problems
Date Posted: January 03, 2006 at 11:43 AM
Hello everyone,Happy new year to all of you.
I installed autopage 855 lcd and 555C transponder bypass in my 2002 chryslerT&C with ,everythings work great but one big problem is...I can't not move the transmission shifter to drive the car even I tried to start the car with the facory key.Dose anyone knows whats causing it???is there any Ground related to that problem.Please help me out.Thanks
-------------
simonmai
Replies:
Posted By: Velocity Motors
Date Posted: January 03, 2006 at 9:44 PM
Make sure that you did not cut the brake wire. Test the brake wire to see if your getting 12 volts. Also, I found that the shifter lever on the 2001+ vans are finicky. Make sure that your not pulling too much while pulling down on the shifter handle, otherwise it will not move ( as you described ).
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|