Clifford siren ident.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69960
Printed Date: May 15, 2024 at 1:10 PM
Topic: Clifford siren ident.
Posted By: Forseti
Subject: Clifford siren ident.
Date Posted: January 03, 2006 at 6:21 PM
I have a Avantguard 4 alarm ..... the "smart siren 4" has been damaged by battery acid. I went to a local guy who sells clifford and I got a new siren. When I opened the box the new one looks like the old but this one has no connector .. just bare wires and it has some sort of key that goes in the top. When I wired it to my alarm and turn the key on all I get are fast clicking.....even after I let it charge up. The part number on the siren is 60-482... do I have the right replacement or do I need to take it back ?
Replies:
Posted By: scirocco16v
Date Posted: January 04, 2006 at 1:18 PM
That is not the right siren and, the one you need used to have dei part number 515c. Doesn't the one you have have only three wires on it where the original for that alarm should have 4 wires inside a black jacket.
|